Playable ads guide

Safe Zones in Mobile Ads: Notches, Close Buttons and Network Overlays

A mobile ad never owns the whole screen, even when it is full-screen. The device has a notch or a camera cut-out at the top and a home indicator at the bottom. The ad container adds a close button, a skip timer, a mute toggle or an install banner. Social placements lay the app's own interface, usernames, captions and buttons, over the creative. Anything important placed in those areas may be covered, cropped or made untappable.

A safe zone is the part of the frame you can trust. This guide covers where each overlay comes from, what the published rules say, and how to design a playable or end card that stays readable and tappable whatever sits on top.

Where overlays come from

  • The device: notches, camera cut-outs and rounded corners at the top, the home indicator or navigation bar at the bottom, and on some phones curved screen edges.
  • The ad container: the close button, skip countdown, sound toggle, privacy or ad-choices icon and sometimes an install bar, added by the network or the app showing the ad.
  • The placement: in social feeds, the app's own buttons, profile name, caption and call-to-action overlay the creative.

Each has different rules, and a creative running on several networks has to respect all of them at once.

The MRAID close region

Most in-app playables run inside a container that follows MRAID, the IAB Tech Lab standard for in-app rich media. The MRAID 3.0 specification says the host must always include a close event region of 50 by 50 density-independent pixels, with the top right corner of the ad's container as the recommended position. The close control is provided by the host, not by the ad. MRAID 3.0 also deprecated useCustomClose, which older ads used to hide the host's close indicator, and added an unload method so an ad can ask to be dismissed gracefully.

The practical consequence: never put anything tappable, or anything the viewer must read, in the top right corner. A CTA there may be hidden under the close button, and a tap on it may close the ad instead. Many networks place additional controls, such as a sound toggle or a countdown, in the other top corner, so keep both top corners clear. What is MRAID explains the standard in more depth.

Network controls

Beyond MRAID, each network draws its own interface around a playable or video: skip timers, progress bars, close buttons that appear after a delay, and in some cases an install button or app information bar. The positions vary between networks and change over time, and they are not always documented as exact measurements. The safest approach is to keep all four corners and a band along the top and bottom free of essential content, and to preview the creative in each network's own test tool before launch. Test and preview tools lists them.

Notches and home indicators

On phones with a notch or a camera cut-out, the top of the screen is partly covered, and the home indicator sits over the bottom edge. Whether a playable is drawn under these areas depends on the container: some networks keep the ad inside the safe area, others let it draw edge to edge. A design that works either way keeps backgrounds full-bleed, so there is no visible border, while keeping text and buttons comfortably inside the edges.

Web content can read the device's safe area insets through CSS environment variables (env(safe-area-inset-top) and its siblings), but not every ad container passes them through. Do not rely on them alone; design margins that are safe even when the insets read as zero.

Social feed overlays

Vertical feed placements cover a large part of the frame with the platform's own interface. TikTok, for example, does not publish a single fixed safe zone for In-Feed ads: its guidance says the safe area depends on the video's dimensions, the length of the ad text and any extra ad formats, and it provides downloadable safe-zone overlays in Ads Manager. Its guidance also says not to place text, logos or key messages where buttons, usernames and captions may appear. Meta likewise provides safe-zone guidance for Stories and Reels placements in its ads guide.

Use the platforms' current overlay templates rather than numbers copied from an old article, because the interface changes. As a rule, the bottom of a vertical feed creative is the most crowded area, with captions and buttons, and the right edge holds the like and share controls.

A safe-zone checklist

  1. Keep both top corners free of anything tappable or essential.
  2. Keep the CTA away from the very bottom edge, clear of the home indicator and of feed captions.
  3. Keep text inside generous side margins, which also helps on curved screens.
  4. Let backgrounds and ambient art run edge to edge, so overlays sit on scenery rather than on a border.
  5. Check portrait and landscape separately; the overlays move when the phone rotates.
  6. Preview in each network's test tool, and on a real phone with a notch.
  7. For feed placements, lay the platform's own overlay template over the creative before export.

Safe zones in the end card

The end card is where safe zones matter most, because it carries the button the whole ad exists for. It also often appears at the moment the network shows its own close button. Place the CTA in the lower-middle part of the screen, above the bottom edge and away from both corners, and keep the headline below the top band. The CTA guide covers button placement, and the end card guide covers layouts.

Common mistakes

  • A tiny CTA in a top corner, where the close button lands on top of it.
  • A headline across the very top, clipped by the notch on one phone and fine on another.
  • A custom close button drawn by the ad itself, which networks may reject and viewers may mistake for a trick.
  • Testing only on a desktop browser, which has no notch, no container and no overlays.
  • Using one network's overlay layout for every network.

Playable Ads Maker's end cards keep headlines and buttons out of the corners where close buttons appear, in both orientations, and exports the same creative for 12 ad networks. The free spec checker checks a built file against each network's published requirements.

Create playable end cards in minutes—no code required.

Open Playable Ads Maker